Bambu Lab TPU 75A Filament (2.85mm, 1kg)
Official Authorized Dealer - iLaser Singapore
Bambu Lab's softest FDM filament yet. TPU 75A is an ultra-soft, naturally matte flexible filament on 2.85 mm spools, developed for the H3C's FlexFeed extruder and capable of volumetric flow up to 10 mm³/s — roughly three times what a conventional 1.75 mm setup achieves.
- Shore 75A — ultra soft: Significantly softer than 85A or 95A TPU. Parts flex under load, absorb compression and spring back. Made for cushioning, watch straps, footwear components, grips and gaskets.
- Tested and certified for skin contact: Suited to wearables worn against the body.
- 2.85 mm for reliable feeding: The larger diameter resists buckling inside the extruder, the usual failure mode with very soft TPU. Diameter tolerance ±0.05 mm.
- High flow: Up to 10 mm³/s volumetric flow rate — fast printing without the reliability trade-off.
- Natural matte finish: Retuned from the ground up to remove the oily sheen common to TPU, leaving a smooth, skin-like texture.
Important compatibility notice
TPU 75A works only with the Bambu Lab H3C fitted with the 2.85 mm hotend (0.4, 0.6 or 0.8 mm nozzle). Standard and high-flow nozzles are not compatible.
Do not use with AMS, AMS lite, AMS 2 Pro, AMS HT or the TPU Feeding Assist Module. Feeding this filament into an AMS inlet may damage the printer. It can be combined with other materials for multi-material printing, but not with PLA or PETG. Please read Bambu Lab's H3C TPU Printing Guide on the Wiki before your first print.
Printing & storage
- Recommended nozzle temperature: 200–250 °C
- Recommended bed temperature: 30–35 °C
- Dry at 70 °C for 8 hours before printing; store in a dry environment
- Set Flow Dynamics Calibration to "Auto"
- A large dry box is required — the spool can deform in an undersized one