Bambu Lab Cool Plate SuperTack FAP023 256 x 256 mm

Bambu Lab Cool Plate SuperTack (FAP023) - 256 x 256 mm

$57.00
Sale price  $57.00 Regular price 
Skip to product information
Bambu Lab Cool Plate SuperTack FAP023 256 x 256 mm

Bambu Lab Cool Plate SuperTack (FAP023) - 256 x 256 mm

$57.00
Sale price  $57.00 Regular price 

Official Authorized Dealer - iLaser Singapore

Bambu Lab part number FAP023. The Cool Plate SuperTack grips hard at low bed temperatures and releases cleanly once the plate cools — no glue needed for PLA and PETG, and far less warping on large flat parts.

  • Fits: X1 Series (X1C / X1E) · P1 Series (P1P / P1S) · A1 · P2S · X2D
  • Print area: 256 × 256 mm
  • Construction: 0.05 mm SuperTack coating on a 0.4 mm spring steel plate
  • Max surface temperature: 120 °C
  • No glue required for PLA and PETG at low bed temperatures

Before you buy

  • Do not print TPU on this plate — adhesion is strong enough to tear the coating.
  • PLA Silk is not recommended — it bonds so hard it can damage the model on removal.
  • Avoid organic solvents, especially acetone. Wash with warm water and dish soap.
  • Bambu Lab treats this plate as a consumable — the coating wears with use.
  • On the X1, P2S and X2D, Bambu recommends turning off build plate position detection; the plate works normally with that setting off.

The A1 mini uses a different, smaller plate.

You may also like