SUNLU FilaDryer S4 Filament Dryer (4 Spools)

Available at iLaser Singapore - Local Stock

The SUNLU FilaDryer S4 is the first filament dryer built to handle four 1kg spools at the same time — so you can keep a full AMS-worth of filament dry, or feed up to four printers simultaneously while they print.

• 4-spool capacity: 450 x 210 x 211 mm interior fits four 1kg spools (1.75mm / 2.85mm / 3.0mm compatible).
• Heats to 70°C: PTC heating element reaches 50°C in about 30 minutes — far quicker than single-spool dryers.
• Even temperature: Two side circulation fans plus a bottom heating fan hold the chamber within ±3°C, so every spool dries evenly.
• Automatic humidity control: Set a target between 30-50% RH; the dryer runs until humidity drops to 25%, then stops.
• Print while drying: Eight filament outlets with PTFE tubing let you run up to four printers straight from the dryer.
• Preset material profiles: Built-in temperature and time settings for PLA, ABS, PETG, TPU, PA and PC.
• Triple safety protection: PTC element, hardware temperature switch and software monitoring with abnormal-temperature alarm. UL certified.

Specifications

• Model: S4-FD
• Product size: 458 x 218 x 312 mm (including tripod feet)
• Interior capacity: 450 x 210 x 211 mm
• Net weight: 4.8 kg
• Power input: AC 110-240V, 50/60Hz
• Rated power: 320W
• Max temperature: 70°C
• Colour: Black

In the box: 1x S4 drying box, 1x power adapter, 1x user manual, 2x PTFE tubes (100cm), 4x PTFE tubes (8cm)

Warranty: 1 year. Damage from using a non-original power supply or from operation outside the instructions is not covered.