Bambu Lab AMS HT
Official Authorized Dealer - 1 Year Local Warranty
A single-spool AMS that is also a proper high-temperature dryer. The AMS HT heats to 85 °C — well above the AMS 2 Pro's 65 °C — so it can keep PA, PC, PET and CF-filled engineering filaments genuinely dry while they print, not just warm.
- Drying up to 85 °C: The temperature range that actually matters for nylon, polycarbonate and carbon-fibre blends. Dry and print from the same unit — no moving a spool from a dryer to the printer and letting it reabsorb moisture on the way.
- Single spool, automatic feed: Feeds and retracts like any AMS, so it joins your existing multi-material setup rather than replacing it.
- Bypass outlet for soft materials: TPU can be fed straight through from the top.
- Wide material support: PLA, PETG, ABS, ASA, PET, PA, PC, PVA, BVOH, PP, POM, HIPS, PLA-CF, PAHT-CF, PETG-CF and TPU.
- Spool compatibility: 50–68 mm wide, 197–202 mm diameter.
AMS HT or AMS 2 Pro?
They solve different problems and many users run both. The AMS 2 Pro holds four spools and dries to 65 °C — the everyday multi-colour workhorse. The AMS HT holds one spool and dries to 85 °C — for the engineering material in the job that has to stay bone dry. Chain an AMS HT alongside your AMS units through the AMS Hub.
Before you order
- Needs its own mains power. The AMS HT does not draw drying power from the printer — it ships with its own power supply and needs a free socket.
- TPU is dry-box only. With TPU loaded, automatic feed and retract are not available; use it as a dryer with the bypass outlet.
- X1 / P1 series may need an AMS Hub or filament buffer depending on how many units you are chaining. Ask us if you are unsure about your setup — we will tell you exactly what you need.
Filament shown in product photos is not included.
iLASER Singapore is the official authorised Bambu Lab dealer in Singapore. Genuine unit, local 1-year manufacturer warranty, and service by our own engineers here.